spray valve SV-1000SS
Min 20 mm spray range for low to medium viscosity materials, valve body stainless steelProduct ID: SV-1000SS
€1,341.55 / piece
| Quantity | Unit price |
|---|---|
| To 3 |
€1,341.55*
|
| To 9 |
€1,301.53*
|
| From 10 |
€1,274.62*
|
The spray valve Model SV-1000SS has been specially developed for spraying of low to medium viscosity materials to produce round spray patterns. The very good adjustment options guarantee a fine spraying operation. Control unit model VC1260 can be programmed to independently control the two pneumatic signals to control the valve one to atomize the material and the second the control the opening duration of the valve. With the short stroke, the valve responds quickly. With the adjusting screw, the opening gap can be easily adjusted. The sprayed material is atomized via the separate spray air channel. The slim design allows installation in automated lines and with high equipment density.
Mode of operation:
The valve is adjustable by turning the stroke-adjust control at the rear of the valve. This will tune the spray pattern. Coating and flow rates are controlled with the fluid pressure, needle stroke, distance from the valve to the work surface and the duration that the valve is open.
| Actuator: | closed (NC) |
|---|---|
| Ausbringungsform (E): | Layers (coating)Spray |
| Dispensing method: | spray (pressure & time) |
| Drive: | NCpneumatic |
| Flow rate : | 28 ml/sec |
| Frequence: | 200 cycle/min |
| Length (mm): | 104 |
| Material: | Stainless steel-- |
| Material dispensed: | AdhesivesAlcohol / methanolAnaerobic adhesivesCyanacrylateElectrolytesFluxInks and coloursOil, greases, lubricantsProtective lacquersRelease agentSolventsUV adhesivesWater |
| Material inlet: | 1/8" NPT |
| Material viscosity (max): | 1.000 mPas |
| Outer Ø (mm): | 27 |
| Recomendation: | Aqueous solutionConformal coatingsGreases, lubricantsOilUV glueVarnish, paint |
| Viscosity: | 1.000 mPaslow viscosity |
| Weight (g): | 346 |
| Wetted parts: | Edelstahl 1.4305 (AISI 303) |
| Wetted parts (E): | O-RingStainless steelStainles steel 1.4305 |
Dazu passend
