Spray Valve SV2001N
Spray valve for dots and lines from 3 mm, valve body stainless steel
Art. Nr.: 507331
Product ID: SV-2001N
Product ID: SV-2001N
Product information "Spray Valve SV2001N"
The SV2001N valve provides close tolerance spray dispensing of fluids up to 1000 cps, including urethanes, flux and paints. The material is fed from a pressure reservoir. The valve is actuated by air pressure sequenced by a controller. The operating air pressure opens a needle valve allowing material to flow; a separate air line creates pressure in the air cap, atomizing the fluid.
Functionality:
The valves are adjustable by turning the stroke-adjust control at the rear of the valve; this will tune the spray pattern.Coating and flow rate are controlled by the fluid pressure, needle stroke, distance from the valve to the work and the duration the valve is open.
| Actuator: | closed (NC) |
|---|---|
| Dispensing method: | spray (pressure & time) |
| Drive: | NCpneumatic |
| Flow rate : | 2400 ml/min |
| Form of application: | Layers (coating)Spray |
| Frequence: | 200 cycle/min |
| Material: | stainless steel |
| Material inlet: | 1/8" NPT |
| Material viscosity (max): | 1.000 mPas |
| Recomendation: | Aqueous solutionConformal coatingsGreases, lubricantsOilUV glueVarnish, paint |
| Viscosity: | 1.000 mPaslow viscositymedium viscosity |
| Weight (g): | 250 |
| Wetted parts (E): | O-RingStainless steeloptional FDA-conform |
Dazu passend
Mounting bracket for valves
Art. Nr.
503980
Product ID
990215
for diaphragm valve VD-510 and DV-5625, SV-1000/2000
Wiper II Direct
Art. Nr.
507924
Product ID
WIPER-II DIREKT
Wiper II is for automatic exterior cleaning of dispensing tips and orifice surroundings
Mounting bracket for valves
Art. Nr.
509603
Valve holder, valve DV-5625 series, SV1000+2000, U-bracket 38 mm, green
spray valve controller VC1260
Art. Nr.
507720
Product ID
VC1260
electronic control unit for spray valves