diaphragm valve DV-5625-MED
stainless steel body (1.4404 / 316L) for low to medium viscosity materialsProduct ID: DV-5625-MED
€1,851.69 / piece
| Quantity | Unit price |
|---|---|
| To 3 |
€1,851.69*
|
| To 9 |
€1,796.13*
|
| To 19 |
€1,759.11*
|
| From 20 |
€1,722.07*
|
The diaphragm dispensing valve DV-5625-MED made of stainless steel 1.4404 (316L) and PE-UHMW is ideally suited for dispensing liquids of the lower and medium viscosity range in the medical technology industry, as the diaphragm hermetically separates the wetted parts from the control unit. With its easy-to-clean and easy-to-service design, these are optimal prerequisites for dispensing cyanoacrylates, UV adhesives, paints and inks, oils, alcohols and other low-viscosity substances. This valve is mounted vertically.
Functionality
The valve is opened by means of a compressed air pulse. A built-in spring closes the valve. The DV-5625-MED valve clearly proves its superiority, especially with high-frequency dispensing cycles of small dispensing quantities. The respective quantities can be precisely adjusted by means of a fine adjustment at the head of the valve. The Luer Lock connection has a very small dead volume!
Typical fluids
Adhesives, UV adhesives, alcohols/methanol, anaerobics, oils/greases/lubricants, solvents
| Actuator: | closed (NC) |
|---|---|
| Ausbringungsform (E): | Lines (string/rope)Points (dot) |
| Dispensing method: | pneumatic (pressure & time) |
| Dispensing quantity (min.) (cc): | 0.001 |
| Drive: | pneumatic |
| Flow rate : | 300 ml/min (H2O, 2 bar) |
| Frequence: | 500 cycle/min |
| Length (mm): | 80 |
| Material: | Stainless steel 1.4404 |
| Material dispensed: | AcidsAdhesivesAlcohol / methanolAnaerobic adhesivesCyanacrylateEpoxyInks and coloursMethacrylateOil, greases, lubricantsProtective lacquersSolventsUV adhesivesWater |
| Material inlet: | 1/8" |
| Material outlet: | Luer-Lock |
| Material viscosity (max): | 50.000 mPas |
| Outer Ø (mm): | 27 |
| Recomendation: | AnaerobicsAqueous solutionConformal coatingsGreases, lubricantsOilSiliconSuper glue cyanoacrylatesUV glueVarnish, paint |
| Viscosity: | low viscositymedium viscosity |
| Weight (g): | 202 |
| Wetted parts: | Stainless steel 1.4404 |
| Wetted parts (E): | FDA compliantPE-UHMWStainles steel 1.4404 |
Dazu passend
