Pinch Tube Valve DV-5120
Product ID: DV-5120
397,28 EUR *
Cantitate | Preț unitar |
---|---|
Pentru a 3 |
397,28 EUR*
|
Pentru a 9 |
385,48 EUR*
|
De la 10 |
377,49 EUR*
|
The pinch tube dispensing valve DV-5120 is pneumatically controlled. It is engineered for precise control of semi-viscous liquids including mixed two-part fluids, cyanoacrylates and other liquids, such as anaerobics, which dictate contact with “non-metallic” valve parts routing the material. The only part of the valve making contact with the fluid being dispensed, is the disposable pinch tube assembly. Should the material cure inside the valve, the pinch tube assembly and the hose can be easily replaced. The pinch tube and related tubing are available in inner diameters of 1.8 mm and 2.5 mm.
Mode of operation
The pinch tube valve is pneumatically controlled. An internal spring displaces an “anvil” shaped part to close, that is to “pinch”, the internal tube shutting off the flow of material. To open the dispensing valve and allow the material to flow, compressed air is used to push a piston against the spring force. The shot size or flow rate is determined by the degree of adjustment in releasing the closed (pinched) tube and by the valve control timer. To change the tube, only the knurled cap is unscrewed. The pinch tube assembly can be changed easily and a new one can be re-inserted.
Dispensing materials
Adhesives, UV adhesives, Acids, Alcohol/Methanol, Anaerobics, Bases, Cyanoacrylates, Oils/Greases/Lubricants, Silicone (RTV)/Gels, Solder Masks/Pastes/PVA, Solvents
Features
Throwaway valve and feed tubes
Suitable for low viscosity fluids
Ideal for two-part epoxies, cyanoacrylates and anaerobics
Simple to use and maintain
Varianta motor (E): | pneumatic |
---|---|
Actuator: | closed (NC) |
Cantitatea de dozare (min.) (ml): | 0.0075 |
Compatibil cu...(E): | AcidsAdhesivesAlcohol / methanolAnaerobic adhesivesBasesCyanacrylateEpoxyMethacrylateOil, greases, lubricantsProtective lacquersSealantsSilicones 1k (RTV)Solder pasteSolventsUV adhesivesWatersolid charged fluids |
Contact material (E): | optional FDA-conform |
Debit: | 1980 ml/min (H2O, 4 bar) |
Dozare forme (E): | liniipuncte |
Frequence: | 500 cycles/min |
Greutate #2 (g): | 90 |
Lungime (mm): | 75 |
Material: | PE |
Material fabricat din: | PE |
Metoda de dozare (E): | pneumatic (pressure & time) |
Recomandat pentru (E): | 2K adezivi amestecațiAcoperiri conformeAdeziv UVAdezivi Super Glue /CianoacrilațiAdezivi termoconductiviAnaerobiciGrăsimi/LubrifianțiLac/vopseaPastă de lipitSiliconSoluție apoasăUlei |
Tip Ieșire material_: | Luer-Lock |
Tip intrare material: | Luer-Lock |
Viscosity: | 1.000 mPas8.000 mPaslow viscositymedium viscosity |
Vâscozitate material (max.): | 50.000 mPas |