Spray Valve SV2001N

Spray Valve SV2001N

Art. Nr.: 507331
Product ID: SV-2001N

1 625,00 €


Číslo výrobku: 507331
Informace o výrobku "Spray Valve SV2001N"
The SV2001N valve provides close tolerance spray dispensing of fluids up to 1000 cps, including urethanes, flux and paints. The material is fed from a pressure reservoir. The valve is actuated by air pressure sequenced by a controller. The operating air pressure opens a needle valve allowing material to flow; a separate air line creates pressure in the air cap, atomizing the fluid.

Functionality:

The valves are adjustable by turning the stroke-adjust control at the rear of the valve; this will tune the spray pattern.
Coating and flow rate are controlled by the fluid pressure, needle stroke, distance from the valve to the work and the duration the valve is open.
Aktuátor: zavřený (NC)
Doporučení: Konformní povlakyLaky, barvyOlejeTuky, mazivaUV lepidlaVodní roztok
Dávkovací metoda: sprejové (tlak & čas)
Dávkovaný materiál: UV lepidlaalkohol / metanolanaerobní lepidlaelektrolytyfluxinkousty a barvykyanakrylátylepidlaochranné lakyoleje, plastická maziva, mazivarozpouštědlauvolňovací činidlavoda
Dávkovatelné tvary : SprejováníVrstvy (povlakování)
Díly v kontaktu s materiálem: Nerezová ocelO-kroužekVolitelně v souladu s FDA
Frekvence: 200 cycle/min
Hmotnost (g): 250
Materiál: Nerezová ocel
Pohon: NCpneumatic
Průtok: 2400 ml/min
Viskozita: 1.000 mPaslow viscositymedium viscosity
Viskozita materiálu (max.): 1.000 mPas
Vstup materiálu: 1/8" NPT

Dazu passend

Mounting bracket for valves
Art. Nr.
503980
Product ID
990215
for diaphragm valve VD-510 and DV-5625, SV-1000/2000
Wiper II Direct
Art. Nr.
507924
Product ID
WIPER-II DIREKT
Wiper II is for automatic exterior cleaning of dispensing tips and orifice surroundings
Locking Nut for SV2000
Art. Nr.
507277
spare part for SV2000
Valve holder, valve DV-5625 series, SV1000+2000, U-bracket 38 mm, green
spray valve controller VC1260
Art. Nr.
507720
Product ID
VC1260
electronic control unit for spray valves