needle valve DV-5425SS
Product ID: DV-5425SS
1.547,38 EUR *
| Cantitate | Preț unitar |
|---|---|
| Pentru a 3 |
1.547,38 EUR*
|
| Pentru a 9 |
1.502,76 EUR*
|
| De la 10 |
1.471,82 EUR*
|
The needle valve DV-5425SS with valve body made of stainless steel is optimized for dispensing low to medium viscosity material. The fluids can be dispensed from the smallest drop to continuous beads. The needle valve is pneumatically controlled. The opening gap can be finely adjusted with the adjusting screw. The slim design allows a high packing density in automated lines.
Function
The valve is closed in the idle position and is opened pneumatically. The valve needle moves upwards out of the seat to the stop and material can flow from the material inlet to the outlet. The opening stroke up to the stop can be finely adjusted via the knurled screw. The valve closes by spring force and can be accelerated by auxiliary air during closing.
Dispensing material
Adhesives, UV adhesives, alcohols/methanol, oils/greases/lubricants
| Varianta motor (E): | NCpneumatic |
|---|---|
| Actuator: | closed (NC) |
| Cantitatea de dozare (min.) (ml): | 0.003 |
| Compatibil cu...(E): | AcidsAdhesivesAlcohol / methanolInks and coloursOil, greases, lubricantsProtective lacquersSilicones 1k (RTV)SolventsUV adhesives |
| Contact material (E): | O-RingPTFEStainles steel 1.4305Viton |
| Debit: | 1680 ml/min (H2O, 7 bar) |
| Diametru exterior Ø (mm): | 28.5 |
| Dozare forme (E): | liniipuncte |
| Frequence: | 600 cycle/min |
| Greutate #2 (g): | 210 |
| Lungime (mm): | 110 |
| Material: | Stainless steel 1.4305 (303) |
| Material fabricat din: | Edelstahl 1.4305 |
| Metoda de dozare (E): | pneumatic (pressure & time) |
| Recomandat pentru (E): | Acoperiri conformeAdeziv UVAnaerobiciGrăsimi/LubrifianțiLac/vopseaSiliconSoluție apoasăUlei |
| Tip Ieșire material_: | Luer-Lock |
| Tip intrare material: | 1/8" |
| Viscosity: | 100.000 mPaslow viscositymedium viscosity |
| Vâscozitate material (max.): | 100.000 mPas |
Dazu passend
Dazu passend
