needle valve DV-5425
Product ID: DV-5425
1.375,37 EUR
| Cantitate | Preț unitar |
|---|---|
| Pentru a 3 |
1.375,37 EUR*
|
| Pentru a 9 |
1.336,37 EUR*
|
| De la 10 |
1.308,72 EUR*
|
The needle valve DV-5425 was especially developed for dispensing of low to medium viscosity materials. The DV-5425 needle valve enables control of material from extremely small individual shots to continuous beads. The needle dispensing valve is pneumatically controlled. The slim design allows for installation in automated lines and a high packing density.
Functionality
The valve is closed in the idle state. The opening gap is adjustable on the valve. The valve is opened with the control air. The valve needle moves up out of the seat and the material can then flow through the material input to the material output. Optionally, auxiliary air can be used for faster closure. Otherwise, the valve closes using spring force.
Dispensing materials
Adhesives, UV adhesives, Alcohol/Methanol, Oils/Greases/Lubricants
| Varianta motor (E): | pneumatic |
|---|---|
| Actuator: | closed (NC) |
| Cantitatea de dozare (min.) (ml): | 0.003 |
| Compatibil cu...(E): | AdhesivesInks and coloursOil, greases, lubricantsProtective lacquersSilicones 1k (RTV)SolventsUV adhesives |
| Contact material (E): | AluminiumCarbidePTFEStainles steel 1.4305Viton |
| Debit: | 1680 ml/min (H2O, 7 bar) |
| Diametru exterior Ø (mm): | 28.5 |
| Dozare forme (E): | liniipuncte |
| Frequence: | 600 cycle/min |
| Greutate #2 (g): | 140 |
| Lungime (mm): | 110 |
| Material: | Aluminium |
| Material fabricat din: | Alu |
| Metoda de dozare (E): | pneumatic (pressure & time) |
| Recomandat pentru (E): | Acoperiri conformeAdeziv UVGrăsimi/LubrifianțiSiliconSoluție apoasăUlei |
| Tip Ieșire material_: | Luer-Lock |
| Tip intrare material: | 1/8" |
| Viscosity: | 100.000 mPaslow viscositymedium viscosity |
| Vâscozitate material (max.): | 100.000 mPas |
Included
Fits to product
