diaphragm valve DV-5625-H
Product ID: DV-5625-H
1 280,50 € *
Množství | Jednotková cena |
---|---|
Do 3 |
1 280,50 €*
|
Do 9 |
1 242,09 €*
|
Do 24 |
1 216,48 €*
|
Od 25 |
1 152,45 €*
|
The DV-5625-H diaphragm dispensing valve is suitable for low to medium viscosity range materials, as the diaphragm isolates the liquid contacting parts from the control unit. These are optimal operating conditions for dispensing cyanoacrylates, paints, inks, electrolytes, glue, alcohols and other low viscous substances. The DV-5625-H diaphragm valve has a material chamber made of PE-UHMW. This metering valve is mounted horizontally.
Feature
The valve is opened by a pulse of compressed air. An integrated spring closes the valve. The DV-5625-H valve clearly proves its superiority, especially for high-frequency dispensing cycles of small dispensing quantities. The respective quantities can be precisely adjusted by fine adjustment at the valve head. The Luer Lock connection has a very small dead volume.
Typical products
Adhesives, acids, alcohol/methanol, anaerobics, bases, cyanoacrylates, oils/greases/lubricants, solvents
Actuator: | closed (NC) |
---|---|
Doporučení: | AnaerobicsAqueous solutionConformal coatingsGreases, lubricantsOilSiliconSuper glue cyanoacrylatesUV glueVarnish, paint |
Dávkovací metoda: | pneumatic (pressure & time) |
Dávkovací množství (min.)(ml): | 0.001 |
Dávkovaný materiál: | AcidsAdhesivesAlcohol / methanolAnaerobic adhesivesCyanacrylateInks and coloursOil, greases, lubricantsProtective lacquersSolventsUV adhesivesWater |
Dávkovatelné tvary : | Lines (string/rope)Points (dot) |
Délka (mm): | 80 |
Díly v kontaktu s materiálem: | PE-UHMW |
Díly v kontaktu s materiálem (E): | FDA compliantPP clearPTFE |
Frekvence: | 500 cycle/min |
Hmotnost (g): | 64 |
Materiál: | UHMW-PE |
Pohon: | pneumatic |
Průtok: | 300 ml/min (H2O, 2 bar) |
Viskozita: | low viscositymedium viscosity |
Viskozita materiálu (max.): | 50.000 mPas |
Vnější Ø (mm): | 27 |
Vstup materiálu: | 1/8" |
Výstup materiálu: | Luer-Lock |